WaveDriver 100 Spectroelectrochemistry System Bundle
Part Number
[WD100-SPEC]
Gone are the days when a spectroelectrochemical experiment required manual operation of two independent instruments (potentiostat and spectrometer) with two separate software packages. Pine Research is pleased to offer our Honeycomb Spectroelectrochemical Cell in conjunction with a fully integrated potentiostat and spectrometer system controlled using a common software application. In addition to operating together as part of an integrated spectroelectrochemical system, the two instruments can also be operated separately as needed. This complete spectroelectrochemical bundle includes everything shown in the Products in Bundle tab.
Product Bundle
This is a product bundle. Product bundles combine compatible products together for easier purchasing and confidence. You can view the bundles that include this product in the tab below.
Gone are the days when a spectroelectrochemical experiment required manual operation of two independent instruments (potentiostat and spectrometer) with two separate software packages. Pine Research is pleased to offer our Honeycomb Spectroelectrochemical Cell in conjunction with a fully integrated potentiostat and spectrometer system controlled using a common software application. In addition to operating together as part of an integrated spectroelectrochemical system, the two instruments can also be operated separately as needed. This complete spectroelectrochemical bundle includes everything shown in the Products in Bundle tab.
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
Important
Bundle Products
Specifications
Includes Free Training Session!
Every purchase of a WaveDriver 100 electrochemical workstation includes a free one-hour online training session! Contact Pine Research to inquire about this free session.
WaveDriver 100 Spectroelectrochemistry System Bundle is sold as a product bundle. Product bundles combine multiple products into one purchase. For details or to purchase additional items, visit the product page for any item in the bundle below.
Qty
Image
Product Name
Part #
View Product
WaveDriver 100 Spectroelectrochemistry System Bundle is sold as a product bundle. The data below aggregates the specifications for each product contained within the bundle..
WaveDriver 100 Spectroelectrochemistry System Bundle
Product Bundles
Product bundle
Bundle includes
Electrochemical cell, Electrochemical workstation, Reference electrode, UV/Vis Light Source, UV/Vis Spectrometer
Bundle application
Spectroelectrochemistry
WaveDriver 100 Electrochemical Workstation
Electrochemical Workstations
Electrode Connections
Reference electrode
Sense line with driven shield
Counter electrode
Drive line with grounded shield
Working electrode channels
Working electrode #1 (WK1)
Separate sense and drive lines, each with driven shield (current measurement via passive shunt)
Working electrode #2 (WK2)
N/A
Ground Connections
DC common (signal)
The DC Common is isolated from the USB port, the instrument chassis and earth ground. The DC Common is accessible via a banana binding post (black) on the back panel.
Chassis terminal
The instrument chassis terminal is accessible via a banana binding post (metal) on the back panel. The GRAY banana plug on the cell cable also provides a chassis connection.
Earth
No direct connection to earth ground is provided.
Measured Current (Potentiostatic Mode)
Current resolution at each range (measured)
31.3 µA, 3.13 µA, 313 nA, 31.3 nA, 3.13 nA, 313 pA, 31.3 pA, 3.13 pA
Autoranging
Yes
Practical current range
20 pA to 1 A
DC accuracy (current, measured)
±0.2% of setting; ±0.05% of range
AC accuracy (measured)
Frequency- and range-dependent to 1 MHz
AC leakage current
Frequency- and range-dependent to 1 MHz
ADC input
16 bits
Filters (for DC Experiments)
100 kHz, 1 kHz, 100 Hz, 30 Hz, 10 Hz
Applied Current (Galvanostatic Mode)
Power Amplifier (Counter Electrode Amplifier)
Output current
±1 A (maximum)
Short circuit current limit
10 mA - 100 nA ranges: <200 mA, 1A, 100 mA ranges: <1.3 A
Compliance voltage
Bandwidth
>2.5 MHz (on fastest speed setting)
Noise and ripple
<35 µV RMS in 2 MHz bandwidth
Slew rate/rise time
10 V/µs (on fastest speed setting)
Electrometer (Reference Electrode Amplifier)
Input impedance
>10¹³ in parallel with <10 pF
Input current
<10 pA leakage/bias current at 25°C
CMRR
>100 dB, 0 - 1 kHz, >74 dB at 10 kHz
Electrometer bandwidth
>15 MHz (3 dB)
Measured Potential
Applied Potential (Potentiostatic Mode)
Potential resolution at each range (applied)
313 µV per DAC bit, 469 µV per DAC bit, 78 µV per DAC bit
DC accuracy (potential, applied)
±0.2% of setting; ±0.05% of range
DAC output (potential)
16 bits
CV sweep rate (minimum)
CV sweep rate (maximum)
Data Acquisition (for DC Experiments)
Clock resolution
10 ns (minimum time base)
Point interval
Synchronization
Simultaneous sampling of all analog input signals
Raw point total
<10 million per experiment
Electrochemical Impedance Spectroscopy (EIS)
EIS capable
EIS frequency range
EIS frequency resolution
<1 ppm 1 MHz - 100 mHz, <70 ppm 1 mHz - 10 µHz, <80 ppm 100 mHz - 10 mHz, <90 ppm 10 mHz - 1 mHz
EIS frequency stability
±10 ppm
Modes
Galvanostatic, Potentiostatic
Voltage excitation setpoint
1 mV - 200 mV peak, ±10% of setting
Current excitation setpoint
0.01% - 100% of current range, 10% of setting, 200 mA maximum
Frequency sweeping
Custom list, Linear, Logarithmic
EIS accuracy
EIS Accuracy Contour Plot
Rotator Control Connections
Rotator connector A
7-pin mini circular DIN includes analog and digital signal grounds, digital rotator enable signal (+15 V max), auxiliary digital output signal, and analog rotation rate control signal
Rotator connector B
3-pin connector includes analog signal ground, digital rotator enable signal (+15 V max), and analog rotation rate control signal
Rate control signal
±10 V, ±2.5 V
Digital enable signal
Open drain with 4.7 kΩ pull up to +5 V (TTL compatible)
Accessories
Dummy cell
External dummy cell included
Cell cable
Combination D-SUB connector to multiple banana plugs via shielded coaxial cables (included)
Auxiliary Connections
Connector C
9-pin DSUB connector that includes DC Common, two digital output signals, and two digital input signals
Trigger input
BNC female, TTL compatible
Trigger output
BNC female, TTL compatible
Potential (E1) output
N/A
Current (I1) output
N/A
Potential (E2) output
N/A
Current (I2) output
N/A
Auxiliary analog input
BNC female, ±10 V differential input, 313 µV resolution, 0.2% accuracy (available when second working electrode not in use)
Auxiliary analog output
BNC female, ±10 V bipolar output, 313 µV resolution, 0.2% accuracy (available when second working electrode not in use)
WK1 input
N/A
WK2 input
N/A
General
Power input
24 VDC (±5%), 5.0 A (low voltage DC device)
Power supply input
100 - 240 VAC, 1.4 - 0.7 A, 50 - 60 Hz
Power supply output
24 VDC, 5.0 A power supply (included) has a C14 type input connector
Power cord
Various international cables sold separately (C13 type)
LED indicators
Power, USB, and status
Instrument dimensions
160 × 324 × 255 mm (6.3 × 12.75 × 10.0 in)
Instrument weight
4.6 kg (10.2 lb)
Spectroelectrochemistry Integration Cable, WaveNow XV and WaveDriver Series
Cables
Cable type
Integration
Cable terminal A type
Plug, Terminal Block, Green, 3-pin
Cable terminal B type
Plug, D-SUB HD 15-pin
Cable terminal C type
Plug, D-SUB HD 26-pin
Cable length
6 ft
Cable color
Gray
Cable instrument compatibility
Avantes UV/Vis Spectrometer/Light Source, WaveDriver series electrochemical workstation, WaveNow XV electrochemical workstation
WaveDriver Series USB Mini-B with Reference Breakout Cell Cable
Cables
Cable type
Workstation cell cable
Cable terminal A type
Plug, D-SUB 17-pin + 7 Coax
Cable terminal B type
Plug, USB Type Mini B with Socketed Reference Electrode Lead
Cable length
3 ft
Cable color
Black
Cable instrument compatibility
WaveDriver series electrochemical workstation
Workstation Cell Cable
Number of cell cable leads
Two (2) in a single USB plug with One (1) socketed reference lead
Cell Cable Lead Termination
Plug, USB Mini-B with Socketed Reference Electrode Lead
Reference Electrode Kit, Silver Pseudo, LowProfile, Varapor, 62 mm Long
Reference Electrodes
Reference chemistry
Reference size type
Reference electrode body diameter
Reference electrode length
Reference frit material
Reference electrode connection style
1 mm metal pin