Screen-Printed Electrodes, Platinum (Pt), 2 mm OD
These low-cost, screen-printed electrodes (SPEs) are suitable for use in the teaching laboratory, biosensor development, and some electroanalytical applications, such as electrochemical measurements within a glovebox. These SPEs are fabricated using the same technology found in most blood glucose sensors. The electrode pattern includes a platinum working electrode, a platinum counter electrode, and a reference electrode which can have the following chemistries: silver/silver chloride (Ag/AgCl), silver (Ag) pseudo, or bare (no reference, only trace ink exposed). The substrate is alumina ceramic and the traces are insulted with borosilicate glass. These electrodes are compatible in non-aqueous solvents. These electrodes have a reasonably long lifetime, subject to how they are used in with what chemistry, certainly much longer than the carbon-based SPEs. If you do not already have it, the Screen-Printed Electrode Cell Starter Kit is required to interface these SPEs to a potentiostat. In addition, even though these SPEs are shipped with a reference electrode, it is advised to have an appropriate Low Profile reference electrodes on hand for use when the reference spot on the SPE has decayed/worn away. This screen-printed electrode is sold in packs of 6.
Out of stock
These low-cost, screen-printed electrodes (SPEs) are suitable for use in the teaching laboratory, biosensor development, and some electroanalytical applications, such as electrochemical measurements within a glovebox. These SPEs are fabricated using the same technology found in most blood glucose sensors. The electrode pattern includes a platinum working electrode, a platinum counter electrode, and a reference electrode which can have the following chemistries: silver/silver chloride (Ag/AgCl), silver (Ag) pseudo, or bare (no reference, only trace ink exposed). The substrate is alumina ceramic and the traces are insulted with borosilicate glass. These electrodes are compatible in non-aqueous solvents. These electrodes have a reasonably long lifetime, subject to how they are used in with what chemistry, certainly much longer than the carbon-based SPEs. If you do not already have it, the Screen-Printed Electrode Cell Starter Kit is required to interface these SPEs to a potentiostat. In addition, even though these SPEs are shipped with a reference electrode, it is advised to have an appropriate Low Profile reference electrodes on hand for use when the reference spot on the SPE has decayed/worn away. This screen-printed electrode is sold in packs of 6.
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
Related Products and Accessories
-
Screen-Printed Electrodes, Platinum (Pt), 2 mm OD, No Reference (Platinum trace), 6-pack
RRPE2021PT-6 -
Reference Electrode Kit, Silver Pseudo, LowProfile, Varapor, 93 mm Long
AFREF003093 -
Screen-Printed Electrode Sample Kit
ACSPEPE -
Screen-Printed Electrodes, Platinum (Pt), 2 mm OD, Ag Pseudo Reference, 6-pack
RRPE2011PT-6 -
Screen-Printed Electrode Cell Kit
AKSPEKIT -
Screen-Printed Electrodes, Platinum (Pt), 2 mm OD, Ag/AgCl Reference, 6-pack
RRPE2001PT-6
