WavePico Wireless Electrochemical Workstation

Name: WavePico Wireless Electrochemical Workstation
SKU: AFTP5
Availability: OutOfStock

Part Number

AFTP5

WavePico Wireless Electrochemical Workstation

WavePico Wireless Electrochemical Workstation - Image 2

This newest addition to our WaveNow® electrochemical workstation series lets you enjoy the freedom of controlling your electrochemical experiments wirelessly! This system also offers the lowest current resolution offered by Pine Research (Practical range lower current is 40 fA), making the WavePico Wireless you trusted workstation for low current measurements, such as what what may be measured when developing biosensors. The WavePico Wireless electrochemical workstation is a potentiostat and galvanostat that gives you portability and access to remote lab spaces without creating a cabling problem. This is the perfect system for use in a glovebox – simply put the entire instrument into the glovebox along with your electrochemical cell and conduct your air-sensitive voltammetry experiments from any nearby computer.

Under the control of our powerful AfterMath Blue® software package, the WavePico Wireless is capable of performing a wide variety of popular DC electroanalytical techniques. Start enjoying the benefits of wireless control and ultra-low current measurements today!

Out of stock

Bundle Customizer

Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.

Specifications

Electrochemical Workstations

Electrode Connections

Reference electrode

Sense line with driven shield

Counter electrode

Drive line with grounded shield

Working electrode channels

1 Channel

Working electrode #1 (WK1)

Separate sense and drive lines, each with driven shield (current measurement via passive shunt)

Working electrode #2 (WK2)

N/A

Ground Connections

DC common (signal)

The DC Common is isolated from the USB port, the instrument chassis, and earth ground. The DC Common is accessible via the Control Port on the back panel.

Chassis terminal

The instrument chassis terminal is accessible via a banana binding post (metal) on the back panel. The GRAY banana plug on the cell cable also provides a chassis connection.

Earth

No direct connection to earth ground is provided.

Measured Current (Potentiostatic Mode)

Current ranges (measured)

±1.5 mA, ±50 µA, ±1.5 µA, ±50 pA, ±50 nA, ±1.5 nA

Current resolution at each range (measured)

47 nA, 1.57 nA, 47 fA, 1.57 fA, 47 pA, 1.57 pA

Autoranging

Yes

Practical current range

40 fA to 1.5 mA

DC accuracy (current, measured)

±0.2% of setting plus ±0.05% of upper five current ranges; ±0.5% of 50 pA range with ±1 pA offset

DC leakage current

< 20 fA at 0 VDC, < 130 fA at 5 VDC

AC accuracy (measured)

N/A

AC leakage current

N/A

ADC input

16 bits

Filters (for DC Experiments)

1 kHz, 12 Hz

Applied Current (Galvanostatic Mode)

Current ranges (applied)

±1.5 mA, ±50 µA, ±1.5 µA, ±50 pA, ±50 nA, ±1.5 nA

Current resolution at each range (applied)

1.57 nA, 47 fA, 47 nA, 1.57 fA, 47 pA, 1.57 pA

DC accuracy (current, applied)

±0.2% of setting; ±0.05% of range

DAC output (current)

16 bits

Power Amplifier (Counter Electrode Amplifier)

Output current

±1.5 mA (maximum)

Short circuit current limit

all ranges: 10 mA

Compliance voltage

>±11 V

Bandwidth

>30 kHz (on fastest speed setting)

Noise and ripple

undetermined

Slew rate/rise time

800 V/ms (galvanostatic mode, on fastest speed setting), 180 V/ms (on fastest speed setting)

Electrometer (Reference Electrode Amplifier)

Input impedance

>10¹³ in parallel with <10 pF

Input current

6 fA leakage/bias current typical, <100 fA max at 25°C

CMRR

>73 dB, 0 - 100 Hz, >60 dB ≤1 kHz, >39 dB ≤10 kHz

Electrometer bandwidth

> 800 kHz (3 dB)

Measured Potential

Potential ranges (measured)

±8 V

Potential resolution at each range (measured)

250 µV per ADC bit

DC accuracy (potential, measured)

±0.2% of setting; ±0.05% of range

ADC output

16 bits

Filters (for DC Experiments)

1 kHz, 12 Hz

Applied Potential (Potentiostatic Mode)

Potential ranges (applied)

±8 V

Potential resolution at each range (applied)

250 µV per DAC bit

DC accuracy (potential, applied)

±0.2% of setting; ±0.05% of range

DAC output (potential)

16 bits

CV sweep rate (maximum)

10 V/s

Data Acquisition (for DC Experiments)

Clock resolution

500 ns (minimum time base)

Point interval

1 ms (minimum)

Synchronization

Simultaneous current and potential input

Raw point total

<10 million per experiment

Electrochemical Impedance Spectroscopy (EIS)

EIS capable

EIS frequency range

N/A

EIS frequency resolution

N/A

EIS frequency stability

N/A

Modes

N/A

Voltage excitation setpoint

N/A

Current excitation setpoint

N/A

Frequency sweeping

N/A

EIS accuracy

N/A

Rotator Control Connections

Rotator connector A

N/A

Rotator connector B

4-pin connector includes chassis ground, rotator enable output signal (+15 V tolerant), analog signal ground (DC Common), and analog rotation rate control output signal

Rate control signal

±10 V

Digital enable signal

Open drain with 4.7 kΩ pull up to +4 V (TTL compatible), open drain (TTL compatible)

Accessories

Dummy cell

External dummy cell included

Cell cable

HD-15 male connector to multiple banana plugs via shielded coaxial cables (included)

Auxiliary Connections

Connector C

N/A

Trigger input

N/A

Trigger output

N/A

Potential (E1) output

N/A

Current (I1) output

N/A

Potential (E2) output

N/A

Current (I2) output

N/A

Auxiliary analog input

N/A

Auxiliary analog output

N/A

WK1 input

N/A

WK2 input

N/A

General

Power input

5.0 VDC, 2 A (low voltage DC device)

Power supply input

100 to 240 VAC, 0.5 A, 50 to 60 Hz

Power supply output

5 VDC, 2.0 A Power supply (included) has a C14 type input connector

Power cord

Various international cables sold separately (C13 type)

LED indicators

Power, USB/wireless connection, status, and overload

Instrument dimensions

55 × 170 × 130 mm (2.17 × 6.69 × 5.12 in)

Workstation shipping dimensions

305 × 254 × 102 mm (12 × 10 × 4 in)

Instrument weight

0.6 kg (1.25 lb)

Workstation shipping weight

1.8 kg (4 lb)

Temperature range

10°C - 40°C

Humidity range

80% RH maximum, non-condensing

Workstation modes

Potentiostat (POT), Galvanostat (GAL), Open-Circuit Potential (OCP), Zero-Resistance Ammeter (ZRA)

Communication

Interface

USB, Wireless

Wireless capable

Yes

WavePico Wireless Electrochemical Workstation

Bundle Customizer

About You

Billing Address

Credentials

WavePico Wireless Electrochemical Workstation

Bundle Customizer

Login

or

Create Account

About You

Billing Address

Credentials

Forgot Password?