Screen-Printed Electrodes, Carbon (C), 2 mm OD, 10-pack
These low-cost, screen-printed electrodes (SPEs) are suitable for use in the teaching laboratory, biosensor development, and some electroanalytical applications, such as electrochemical measurements within a glovebox. These SPEs are fabricated using the same technology found in most blood glucose sensors. The electrode pattern includes a carbon working electrode, a carbon counter electrode, and a silver/silver chloride (Ag/AgCl) reference electrode. The substrate is polyethylene terephthalate (PET) and the traces are insulted with a proprietary dielectric insulating material. These electrodes incompatible in non-aqueous solvents. These electrodes have a short lifetime, subject to how they are used in with what chemistry. If you do not already have it, the Screen-Printed Electrode Cell Starter Kit is required to interface these SPEs to a potentiostat.
These low-cost, screen-printed electrodes (SPEs) are suitable for use in the teaching laboratory, biosensor development, and some electroanalytical applications, such as electrochemical measurements within a glovebox. These SPEs are fabricated using the same technology found in most blood glucose sensors. The electrode pattern includes a carbon working electrode, a carbon counter electrode, and a silver/silver chloride (Ag/AgCl) reference electrode. The substrate is polyethylene terephthalate (PET) and the traces are insulted with a proprietary dielectric insulating material. These electrodes incompatible in non-aqueous solvents. These electrodes have a short lifetime, subject to how they are used in with what chemistry. If you do not already have it, the Screen-Printed Electrode Cell Starter Kit is required to interface these SPEs to a potentiostat.
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
- Yokus et al. Wearable multiplexed biosensor system toward continuous monitoring of metabolites. Biosensors and Bioelectronics, 2020, 153, 112038.
- Zhao et al. Quantitative Detection of Uric Acid by Electrochemical-Surface Enhanced Raman Spectroscopy Using a Multilayered Au/Ag Substrate. Analytical Chemistry, 2015, 87, 441-447.
