Contact Pine to download the new firmware. The firmware upgrade will be inside a ZIP file as shown below.
Double-click on the firmware package to launch the firmware update program (see below).
Make sure that the AfterMath application is NOT running and press the OK button.
Information about the firmware version is displayed for your review.
Press the OK button to install the new firmware in the potentiostat (see below).
Wait for the firmware to be installed. This may take several seconds (see below).
After the firmware is installed, the potentiostat will reset and the process is complete.
Note that the message “*** Receive timed out” (as shown below) is the normal response after the reset.
A dialog box confirming success will also appear (see below).
At this point, you can restart AfterMath and confirm that the correct firmware version has been installed (see below).
Related Software Links: AfterMath Support Page, AfterMath User Guide, AfterMath Electrochemistry Guide, AfterMath Installation Guide
Related Hardware Links: WaveNow USB Potentiostat, WaveNano USB Potentiostat, WaveDriver USB Potentiostat