WaveDriver 100 Electrochemical Workstation Cell Cable
This cell cable is for use with the WaveDriver 100 electrochemical workstation. The cable mounts to the D-SUB cell port on the front of the workstation and breaks out the main cell connections to color-coded banana plugs. A set of five alligator clips that slide on to the banana plugs is included with the cell cable. This cell cable is included with the purchase of a compatible electrochemical workstation.
This product is available in related bundles. View related bundles in the tab below.
Customers must be logged into their account to view prices. Not all regions provide pricing online. If you do not see prices, you can obtain them from the designated sales channel in your region.
This cell cable is for use with the WaveDriver 100 electrochemical workstation. The cable mounts to the D-SUB cell port on the front of the workstation and breaks out the main cell connections to color-coded banana plugs. A set of five alligator clips that slide on to the banana plugs is included with the cell cable. This cell cable is included with the purchase of a compatible electrochemical workstation.
This product is only compatible with the WaveDriver 100 electrochemical workstation.
For typical three-electrode cell usage, the working electrode sense line (orange); should be shorted to the working electrode drive line (red) by connecting the banana plug from one into the backside port of the other; or, if using alligator clips, by connecting the alligator clips together on these two lines.
For typical two-electrode cell usage, the working electrode sense line (orange) should be shorted to the working electrode drive line (red) by connecting the banana plug from one into the backside port of the other. Similarly, the reference electrode line (white) should be shorted to the counter electrode line (green) by connecting the banana plug from one into the backside port of the other.
When using this cable to make connections to a rotating disk electrode, plug the working drive line (red) banana plug into one of the red (disk) banana jacks on the rotator, and then plug the working sense line (orange) into the other red (disk) banana jacks on the rotator. If your rotator only has one disk (red) jack, then stack working drive and sense lines together, then insert the stacked line into each rotator disk jack.
| Color | Electrode |
|---|---|
| Red | Working Electrode 1 (drive) |
| Orange | Working Electrode 1 (sense) |
| Green | Counter Electrode |
| White | Reference Electrode |
| Gray | Instrument Chassis (ground) |
