Proteus Gamma I Cell Kit
The Proteus Gamma I Cell is a commonly used tool for either studying corrosion of flat metal samples or for use to study photoelectrochemical reactions. The Proteus Gamma I cell is especially suited to thin and planar samples without the need for expensive sample holders or custom electrodes while being just as easy to install glass/quartz windows instead for a truly versatile cell. The Proteus Gamma I was designed to be simple to use, quick to assemble/disassemble/clean, sturdy, flexible, and versatile. For many applications, the Proteus Gamma I Cell from Pine Research can simplify the physical setup of of both corrosion and photoelectrochemical experiments. Customers often choose our Proteus Gamma I Cell for the following primary reasons:
- simple design with easy-to-change samples/windows
- low-cost alternative to traditional corrosion flat cells
- low-cost alternative to quartz-based photoelectrochemical cells
The Proteus Gamma I Cell is a commonly used tool for either studying corrosion of flat metal samples or for use to study photoelectrochemical reactions. The Proteus Gamma I cell is especially suited to thin and planar samples without the need for expensive sample holders or custom electrodes while being just as easy to install glass/quartz windows instead for a truly versatile cell. The Proteus Gamma I was designed to be simple to use, quick to assemble/disassemble/clean, sturdy, flexible, and versatile. For many applications, the Proteus Gamma I Cell from Pine Research can simplify the physical setup of of both corrosion and photoelectrochemical experiments. Customers often choose our Proteus Gamma I Cell for the following primary reasons:
- simple design with easy-to-change samples/windows
- low-cost alternative to traditional corrosion flat cells
- low-cost alternative to quartz-based photoelectrochemical cells
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
- for photoelectrochemical experiments, where light enters the cell to activate a species (i.e., catalyst) on the electrode (anode) to initiate an electrochemical reaction. In this configuration, customers will want to purchase optically transparent quartz window(s) (RRPG313) with the cell.
- for the electrochemical corrosion analysis of flat, often coated, metal samples. In this configuration, flat metal samples are installed on one (or both) ends of the cell, additional electrodes as required are placed in the cell through access ports, and corrosion measurements are made on these flat metal samples. Scientists often use such a cell to evaluate the corrosion resistance of coatings (paints and polymers). In this configuration, customers will want to purchase the Flat Electrode Connectors (AC01CKT1012S01 and AC01CKT1012S02) with the cell.
- Opening #1 is a 1.43 cm OD opening (1.6 cm2 exposed).
- Opening #2 is a 3.12 cm OD opening (7.7 cm2 exposed).
- Flat fluroelastomer O-rings (included with cell) seat into the PTFE cell body, providing just enough give to provide a seal with included polycarbonate end plates.
- Flat sample and/or glass/quartz window insert thickness can vary between 1 mm and 4 mm.
- Polycarbonate end plates held in place with two nuts, for easy assembly and disassembly.
- PTFE cell body contains three 14/20 tapered joints for working, electrode, and counter electrodes as well as purging/sparging accessories.
- Chemically resistant PTFE cell is ideal for aqueous and non-aqueous experiments, including high alkaline solutions.
- Two-in-one cell system. Simply replace flat metal samples with quartz windows to convert between corrosion and photo electrochemical cell. The protean nature of this cell lends itself to use in multiple chemical applications.
Related Products and Accessories
-
Quartz Window for Proteus Gamma Series Cells
RRPG313 -
O-Ring, Viton, Square, Size #113
KAA113V -
O-Ring, Viton, Square, Size #124
KAA124V -
Purge Kit for 1/4″ Tubing
AKPURGE1 -
Reference Electrode Salt Bridge Kit
AKTUBE1420 -
Counter Electrode Assembly, Platinum (Pt), 14/20
AFCTR5 -
Reference Electrode, Silver/Silver Chloride, Single Junction
RREF0021
