Advanced Low Volume Membrane Cell Kit Component: Cell Puck
Two polytetrafluoroethylene (PTFE) “pucks” are fitted onto the ends of each half cell and are sealed against the glass with an O-ring. The opening in the pucks determines the surface area of the separator that is exposed to solution. The standard cell kit uses pucks with a 1 cm2 opening. A second O-ring fits in a groove on the outside of each puck, and the cell kit frame results in those O-rings being perfectly centered, sealing on the membrane/separator, as the assembly is tightened.
This product is available in related kits. View related kits in the tab below.
Customers must be logged into their account to view prices. Not all regions provide pricing online. If you do not see prices, you can obtain them from the designated sales channel in your region.
Two polytetrafluoroethylene (PTFE) “pucks” are fitted onto the ends of each half cell and are sealed against the glass with an O-ring. The opening in the pucks determines the surface area of the separator that is exposed to solution. The standard cell kit uses pucks with a 1 cm2 opening. A second O-ring fits in a groove on the outside of each puck, and the cell kit frame results in those O-rings being perfectly centered, sealing on the membrane/separator, as the assembly is tightened.
