Subtotal: $0.00
Products in the Legacy Products Category
Explore all Pine Research products in the Legacy Products category. Use the Product Filters below to refine the list.
Product Filters
Product Applications
Education (1)
General Electrochemistry (1)
Product categories
Legacy Accessories (21)
Legacy Bundles (4)
Legacy Electrochemical Workstations (7)
Legacy Electrode Rotators (13)
Legacy Electrodes (36)
Product tags
analog (1)
Bundle (4)
cell cable (1)
discontinued (80)
dummy cell (2)
filter (1)
National Instruments (3)
PEEK (2)
Product Bundle (4)
PTFE (1)
RCE (1)
RDE (3)
RRDE (1)
Product Auxiliary analog output
BNC female, ±10 V bipolar output, 313 µV resolution, 0.2% accuracy (available when second working electrode not in use) (2)
N/A (2)
Product Bandwidth
>2.5 MHz (on fastest speed setting) (0)
>20 kHz (on fastest speed setting) (2)
>200 kHz (on fastest speed setting) (2)
>30 kHz (on fastest speed setting) (0)
Product Cell cable
Combination D-SUB connector to multiple banana plugs via shielded coaxial cables (included) (2)
HD-15 male connector to multiple banana plugs via shielded coaxial cables (included) (2)
Product Cell cable lead colors
Counter/Auxiliary [GREEN] (1)
Instrument Chassis (ground) [GRAY] (1)
Reference [WHITE] (1)
Working 1 (drive) [RED] (1)
Working 1 (sense) [ORANGE] (1)
Working 2 (drive) [BLUE] (0)
Working 2 (sense) [VIOLET] (0)
Product Cell cable shielded lines
Counter (1)
Reference (1)
Working 1 (drive) (1)
Working 1 (sense) (1)
Working 2 (drive) (0)
Working 2 (sense) (0)
Product Chassis terminal
The instrument chassis terminal is accessible via a banana binding post (metal) on the back panel. The GRAY banana plug on the cell cable also provides a chassis connection. (0)
The metal case (chassis) is connected to the shield on the Cell Port and the shield on the USB Port. (2)
The metal case (chassis) terminal is a banana binding post (back panel) which may optionally be used to connect the chassis to earth ground or signal ground to improve noise screening (shielding). (2)
Product Clock resolution
10 ns (minimum time base) (2)
500 ns (minimum time base) (2)
Product CMRR
> 50 dB at 10 kHz (2)
>100 dB, 0 - 1 kHz (2)
>39 dB ≤10 kHz (0)
>40 dB ≤ 1 MHz (0)
>60 dB ≤1 kHz (0)
>60 dB ≤100 kHz (0)
>73 dB, 0 - 100 Hz (0)
>74 dB at 10 kHz (2)
>80 dB ≤10 kHz (0)
80 dB at 60 Hz (2)
Product Compatible electrode tips
DTI60 (RRDE tip) (1)
E2 (RDE tip + shaft) (0)
E3 (RDE tip) (0)
E4 (RDE tip) (0)
E5 (RDE tip) (1)
E6 (RRDE tip) (1)
E7 (RRDE tip) (1)
E8 (RRDE tip) (1)
MT28 (RRDE tip) (1)
MT29 (RRDE tip) (1)
MTI34 (RRDE tip) (1)
MTI36 (RRDE tip) (1)
None (0)
QC012 (RCE tip) (0)
Product Compliance voltage
>±11 V (0)
±12 V (2)
±16.5 V (2)
±17 V (0)
Product Connector C
9-pin DSUB connector includes digital signal ground, two digital output signals, and three digital input signals (2)
9-pin DSUB connector that includes DC Common, two digital output signals, and two digital input signals (0)
N/A (2)
Product Current ranges (applied)
±1 A (2)
±1 mA (3)
±1 µA (2)
±1.5 mA (0)
±1.5 nA (0)
±1.5 µA (0)
±10 mA (2)
±10 µA (3)
±100 mA (3)
±100 nA (3)
±100 µA (2)
±150 mA (0)
±150 nA (0)
±150 µA (0)
±2 µA (1)
±200 µA (1)
±5 mA (1)
±5 nA (0)
±5 µA (0)
±50 nA (0)
±50 pA (0)
±50 µA (1)
Product Current ranges (measured)
±1 A (2)
±1 mA (3)
±1 µA (2)
±1.5 mA (0)
±1.5 nA (0)
±1.5 µA (0)
±10 mA (2)
±10 µA (3)
±100 mA (3)
±100 nA (3)
±100 µA (2)
±150 mA (0)
±150 nA (0)
±150 µA (0)
±2 µA (1)
±200 µA (1)
±5 mA (1)
±5 nA (0)
±5 µA (0)
±50 nA (0)
±50 pA (0)
±50 µA (1)
Product Current resolution at each range (applied)
1.57 fA (0)
1.57 nA (0)
1.57 pA (0)
1.7 nA (1)
156 nA (1)
157 fA (0)
157 nA (0)
157 pA (0)
3.1 µA (1)
3.13 nA (2)
3.13 pA (2)
3.13 µA (2)
3.4 pA (1)
31.3 nA (2)
31.3 pA (2)
31.3 µA (2)
313 nA (2)
313 pA (3)
34 nA (1)
4.7 nA (0)
4.7 pA (0)
4.7 µA (0)
47 fA (0)
47 nA (0)
47 pA (0)
6.25 nA (1)
68 pA (1)
Product Current resolution at each range (measured)
1.57 fA (0)
1.57 nA (0)
1.57 pA (0)
1.7 nA (1)
157 fA (0)
157 nA (0)
157 pA (0)
170 nA (1)
3.13 nA (2)
3.13 pA (2)
3.13 µA (2)
3.4 pA (1)
3.4 µA (1)
31.3 nA (2)
31.3 pA (2)
31.3 µA (2)
313 nA (2)
313 pA (2)
34 nA (1)
340 pA (1)
4.7 nA (0)
4.7 pA (0)
4.7 µA (0)
47 fA (0)
47 nA (0)
47 pA (0)
6.8 nA (1)
68 pA (1)
Product CV sweep rate (maximum)
10 V/s (2)
125 V/s (2)
75 V/s (0)
Product DC common (signal)
The DC Common is accessible via the black banana plug on the cell cable and the center pin on the Rotator Control Port (2)
The DC Common is isolated from the USB port, the instrument chassis and earth ground. The DC Common is accessible via a banana binding post (black) on the back panel. (2)
The DC Common is isolated from the USB port, the instrument chassis, and earth ground. The DC Common is accessible via the Control Port on the back panel. (0)
Product Digital enable signal
open drain (TTL compatible) (4)
Open drain with 4.7 kΩ pull up to +4 V (TTL compatible) (2)
Open drain with 4.7 kΩ pull up to +5 V (TTL compatible) (0)
Product Electrometer bandwidth
> 800 kHz (3 dB) (2)
>11 MHz (3 dB) (2)
>15 MHz (3 dB) (0)
Product Filters (for DC Experiments)
1 kHz (2)
10 Hz (2)
10 kHz (2)
100 Hz (2)
100 kHz (0)
12 Hz (0)
2.5 kHz (2)
30 Hz (2)
Product Input current
<10 pA leakage/bias current at 25°C (2)
<2 pA leakage/bias current at 25°C (2)
6 fA leakage/bias current typical, <100 fA max at 25°C (0)
Product Input impedance
>10¹² in parallel with <10 pF (0)
>10¹³ in parallel with <10 pF (2)
>10¹⁴ in parallel with <10 pF (2)
Product Instrument dimensions
160 × 324 × 255 mm (6.3 × 12.75 × 10.0 in) (2)
165 × 100 × 29 mm (6.5 × 3.9 × 1.1 in) (2)
55 × 170 × 130 mm (2.17 × 6.69 × 5.12 in) (0)
Product Instrument weight
0.6 kg (1.25 lb) (0)
280 g (10 oz.) (2)
4.6 kg (10.2 lb) (2)
Product Output current
±1 A (maximum) (2)
±1 mA (maximum) (1)
±1.5 mA (maximum) (0)
±100 mA (maximum) (1)
±150 mA (maximum) (0)
Product Point interval
1 ms (minimum) (0)
500 µs (minimum) (2)
80 µs (minimum) (2)
Product Potential ranges (applied)
±10 V (2)
±15 V (2)
±2.5 V (0)
±4 V (2)
±8 V (0)
Product Potential ranges (measured)
±10 V (2)
±15 V (2)
±2.5 V (0)
±4 V (2)
±8 V (0)
Product Potential resolution at each range (applied)
125 µV per DAC bit (2)
250 µV per DAC bit (0)
313 µV per DAC bit (2)
469 µV per DAC bit (2)
78 µV per DAC bit (2)
Product Potential resolution at each range (measured)
136 µV per ADC bit (2)
250 µV per ADC bit (0)
313 µV per ADC bit (2)
340 µV per ADC bit (0)
469 µV per ADC bit (2)
78 µV per ADC bit (0)
Product Power input
24 VDC (±5%), 5.0 A (low voltage DC device) (0)
24.0 VDC (±5%), 4.0 A (low voltage DC device) (2)
5.0 VDC, 2 A (low voltage DC device) (2)
Product Power supply input
100 - 240 VAC, 1.4 - 0.7 A, 50 - 60 Hz (2)
100 to 240 VAC, 0.5 A, 50 to 60 Hz (0)
100 to 240 VAC, 300 mA, 50 to 60 Hz (2)
Product Power supply output
24 VDC, 5.0 A power supply (included) has a C14 type input connector (2)
5 VDC, 2.0 A Power supply (included) has a C14 type input connector (2)
Product Practical current range
1 nA to 100 mA (1)
100 pA to 1 A (2)
20 pA to 1 A (0)
20 pA to 1 mA (1)
40 fA to 1.5 mA (0)
Product Rate control signal
±10 V (4)
±2.5 V (2)
Product Rod diameter
13 mm (3)
6.3 mm (1)
6.4 mm (0)
8 mm (0)
Product Rod length
110 mm (1)
119 mm (0)
170 mm (0)
184 mm (1)
57 mm (1)
60 mm (0)
70 mm (0)
Product Rotating application
None (stationary, non-rotating) (0)
Rotating Cylinder (RCE) (0)
Rotating Disk (RDE) (4)
Rotating Ring-Disk (RRDE) (4)
Product Rotator connector A
7-pin mini circular DIN includes analog and digital signal grounds, digital rotator enable signal (+15 V max), auxiliary digital output signal, and analog rotation rate control signal (0)
7-pin mini circular DIN includes analog and digital signal grounds, digital rotator enable signal, auxiliary digital output signal, and analog rotation rate control signal (2)
N/A (2)
Product Rotator connector B
3-pin connector includes analog signal ground, digital rotator enable signal (+15 V max), and analog rotation rate control signal (2)
4-pin connector includes chassis ground, rotator enable output signal (+15 V tolerant), analog signal ground (DC Common), and analog rotation rate control output signal (2)
Product Shaft length (overall)
110 mm (4.3 in) (1)
126 mm (4.95 in) (0)
152 mm (6 in) (0)
154 mm (6.1 in) (1)
158 mm (1)
170 mm (0)
171 mm (6.7 in) (0)
179 mm (7.05 in) (0)
184 mm (0)
259 mm (10.2 in) (0)
267 mm (10.5 in) (0)
Product Shaft shroud diameter
12 mm (0)
13 mm (1)
15 mm (1)
18 mm (1)
Product Shaft shroud length
101 mm (1)
152 mm (0)
16.6 mm (0)
56 mm (1)
66 mm (0)
76 mm (1)
83 mm (0)
Product Shaft shroud material
N/A (No shroud) (1)
PEEK (1)
PTFE (2)
Product Slew rate/rise time
10 V/µs (on fastest speed setting) (2)
180 V/ms (on fastest speed setting) (2)
800 V/ms (galvanostatic mode, on fastest speed setting) (0)
Product Trigger input
BNC female, TTL compatible (2)
N/A (2)
Product Trigger output
BNC female, TTL compatible (2)
N/A (2)
Product WK1 input
BNC female, ±10V differential input, 20 kΩ impedance, ±0.5% accuracy; allows external waveform to be summed directly to the working electrode excitation signal (2)
N/A (2)
Product WK2 input
BNC female, ±10V differential input, 20 kΩ impedance, ±0.5% accuracy; allows external waveform to be summed directly to the working electrode excitation signal (2)
N/A (2)
Product Working electrode #2 (WK2)
N/A (2)
Separate sense and drive lines, each with driven shield (current measurement via passive shunt) (1)
Separate sense and drive lines, each with driven shield (current measurement via transimpedance amplifier) (0)
Separate sense and drive lines, each with driven shield (current measurement via transimpedance amplifier). Note: AC techniques are not available on WK2. (0)
Product Working electrode channels
1 Channel (3)
2 Channels (1)
Product Workstation modes
Galvanostat (GAL) (4)
Open-Circuit Potential (OCP) (4)
Potentiostat (POT) (4)
Zero-Resistance Ammeter (ZRA) (4)
Product Workstation shipping dimensions
254 × 356 × 457 mm (10 × 14 × 18 in) (2)
260 × 260 × 360 mm (10.2 × 10.2 × 14.2 in.) (2)
305 × 254 × 102 mm (12 × 10 × 4 in) (0)
Product Workstation shipping weight
1.4 kg (3 lb) (2)
1.8 kg (4 lb) (0)
7.7 kg (17 lb) (2)
Showing 12 of 80 results