FSCV Headstage Amplifier (1 megaohm/1,000 nA/V)
This Headstage Amplifier is designed for use with the Pine Research WaveNeuro Fast-Scan Cyclic Voltammetry Potentiostat System. Installation is as simple as “clicking” the adapter onto the headstage cable. This 1,000 nA/V (1 MΩ), working driven headstage amplifier is wrapped in white-colored shrink tubing to differentiate it from our other headstage gains. This particular adapter is for FSCV experiments where larger/higher surface area electrodes are used; thus, lower gain is required.
[alert color=”blue” icon=”info-circle”]Pine Research FSCV headstage adapters are available in different gains, as your research may require. Contact Pine Research for pricing and lead time on a custom gain headstage amplifier.[/alert]
This Headstage Amplifier is designed for use with the Pine Research WaveNeuro Fast-Scan Cyclic Voltammetry Potentiostat System. Installation is as simple as “clicking” the adapter onto the headstage cable. This 1,000 nA/V (1 MΩ), working driven headstage amplifier is wrapped in white-colored shrink tubing to differentiate it from our other headstage gains. This particular adapter is for FSCV experiments where larger/higher surface area electrodes are used; thus, lower gain is required.
[alert color=”blue” icon=”info-circle”]Pine Research FSCV headstage adapters are available in different gains, as your research may require. Contact Pine Research for pricing and lead time on a custom gain headstage amplifier.[/alert]
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
Pine Research currently offers working driven headstage amplifiers. In a working driven system, the reference electrode is grounded. The FSCV potential waveform (ramp) is connected to the non-inverting input of the operational amplifier, while the working electrode is connected to the inverting input. In this arrangement, the voltage at the microelectrode will follow the ramp applied to the inverting input.1
[alert color="red" icon="exclamation-circle"]Even when no electrodes are connected (connector just in air) to the headstage amplifier cable, which is connected to the WaveNeuro, HDCV will show a current response that follows the applied waveform. As described below, this is expected.[/alert]
In this two-electrode configuration, current arising from electron-transfer reactions, such as the oxidation of dopamine, passes between reference and working electrodes. The measured current passes through the headstage amplifer, where it is converted to voltage, and sums with the the ramp voltage at the inverting input. Mathematically,
where 
is the output voltage, 
is input current, 
is feedback resistor (gain), and 
is the CV ramp voltage. By rearrangement, the signal voltage (proportional to the current across the 
feedback resistor in the 
headstage) is then
HDCV software, which supports the WaveNeuro FSCV Potentiostat system, performs software subtraction of the ramp according to this relationship, resulting in only the true differential current measurement.1
(1) Takmakov, P.; McKinney, C. J.; Carelli, R. M.; Wightman, R. M. Instrumentation for Fast-Scan Cyclic Voltammetry Combined with Electrophysiology for Behavioral Experiments in Freely Moving Animals. Rev. Sci. Instrum. 2011, 82, 74302.
[call_to_action color="violet" button_icon="link" button_text=" Review Journal Article" button_icon_position="left" button_url="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3160449/" layout="vertical"]R.M. Wightman et. al. have reported on this topic in depth If, after reviewing this document, you have any questions about our neuroelectrochemical research products, please do not hesitate to contact us. [/call_to_action]