Advanced Low Volume Membrane Cell Kit Component: Cell Puck
Two polytetrafluoroethylene (PTFE) “pucks” are fitted onto the ends of each half cell and are sealed against the glass with an O-ring. The opening in the pucks determines the surface area of the separator that is exposed to solution. The standard cell kit uses pucks with a 1 cm2 opening. A second O-ring fits in a groove on the outside of each puck, and the cell kit frame results in those O-rings being perfectly centered, sealing on the membrane/separator, as the assembly is tightened.
Two polytetrafluoroethylene (PTFE) “pucks” are fitted onto the ends of each half cell and are sealed against the glass with an O-ring. The opening in the pucks determines the surface area of the separator that is exposed to solution. The standard cell kit uses pucks with a 1 cm2 opening. A second O-ring fits in a groove on the outside of each puck, and the cell kit frame results in those O-rings being perfectly centered, sealing on the membrane/separator, as the assembly is tightened.
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
