Photoelectrochemical Cell Kit, Dual Chamber, Quartz
Our photoelectrochemical cell is designed to accommodate a wide variety of photo-anodes and electrochemical configurations for dual chamber photoelectrochemistry research. Each half cell houses an independent anode or cathode based on the user configuration. The cells are joined with an O-ring seal and pinch clamp, where the user can install a separator (membrane, filter, Nafion, e.g.) of their choosing. The Quartz Photoelectrochemical Cell Kit is available as a bundle which includes the following: two quartz half cells (250 mL) with six total 14/20 side ports, gas purge/sparge entry accessories, two large bore electrode adapters (55/50 joint), two electrode holders with 10 photo-anode clips, six 14/20 PTFE stoppers, a pinch clamp with 10 O-rings, and one platinum coil counter electrode with isolation tube.
Our photoelectrochemical cell is designed to accommodate a wide variety of photo-anodes and electrochemical configurations for dual chamber photoelectrochemistry research. Each half cell houses an independent anode or cathode based on the user configuration. The cells are joined with an O-ring seal and pinch clamp, where the user can install a separator (membrane, filter, Nafion, e.g.) of their choosing. The Quartz Photoelectrochemical Cell Kit is available as a bundle which includes the following: two quartz half cells (250 mL) with six total 14/20 side ports, gas purge/sparge entry accessories, two large bore electrode adapters (55/50 joint), two electrode holders with 10 photo-anode clips, six 14/20 PTFE stoppers, a pinch clamp with 10 O-rings, and one platinum coil counter electrode with isolation tube.
Components below showing require a selection. Components showing are optional, and do not require a selection.
Bundle Customizer
Toggle each component below and make your selection. Once all required selections have been made, the total price and add to cart button will display at the end of the components list.
